Now that you know what an electric skateboard is, how do you ride it? If you already have riding experience with a normal skateboard, you have a big advantage. There isn't much difference between riding an Electric skateboarding and one propelled by your feet, but it may take some practice due to the speed and remote control. If you're new to skateboarding, it can be even more challenging to learn. Here's what to do:
Tips Before Riding an Electric Skateboard
1. Wear Proper Safety Gear
Before you step onto an electric or regular skateboard, you need the right gear on. This includes proper helmet, wrist, elbow and knee pads. Wrist injuries are common in skateboarding because when you fall, you are likely to reach out to catch yourself. Head injuries can be serious, so always wear a helmet that is comfortable, but not so tight that you hurt yourself. It should sit flat on your head (not tilted back), so the front is about an inch above your brow.
If you usually use a normal skateboard and don't have much gear, we highly recommend you replace it. Because of how fast electric skateboards can go, they can be more dangerous than regular skateboards. The shoes you wear also matter. It is best to wear open-toed shoes that cover your feet (no sandals). Cushioned shoes can even help dampen the effects of road vibrations felt by the legs.
2. Choose a Skateboard Stance
If you've skateboarded before, you're probably used to the natural position. Your snowboard position also plays a role. There are two main poses: regular and silly. The routine is when you bring your left foot forward toward the nose of the board. Goofy is when you lead with your right foot. Since most people are right-handed, it's common to have the left foot forward. That said, it doesn't mean that regular positions always feel most natural if you're right-handed. There is no "right" posture, so just do what feels comfortable and most stable to you.
Once you've settled on your stance, think about how you feel on the veymax skateboard. are you stiff You don't want to toss and turn, but if your body is too stiff and stiff, you're more likely to fall. Extend your arms for balance, but don't hold them like an iron bar. As you start riding slowly, be prepared to bend your knees slightly; this bend will help you maintain your balance. Having your feet spread apart does make carving and turning more difficult, so once you feel confident with a particular board, you might consider narrowing your stance slightly again to make turning easier.
Tips When Riding an Electric Skateboard
1. How to Turn
How to turn when skateboarding? It might take some practice if you're new to it. If yes, it's the same as opening a normal board. There are two types of turns: heel turns or toe turns. If your stance is fixed, your heels will turn you to the left and your toes will turn you to the right. The opposite is true if you are in a goofy pose.
For a heel turn, bend your knees slightly, place your weight on the heel of your front foot, and push your hips out as you shift your weight. You will feel the chessboard turning. For the toe side, bend your knees and shift your weight forward a bit while putting some weight on the toes of your front foot. If you feel like you're going to fall forward, don't lean back; the board will shoot out from under you. Bend your knees and lean forward into the turn.
The kick spin is another easy turn to learn. To kick spin, stand on your board, shift your weight to the rear wheel, lift the front wheel, and swing the front of your board in the direction you want to go. This is a great way to enhance the overall balance, but it's a bit more advanced. You can also search veymaxboard blogs to learn more skateboarding skills and knowledge.
This fluid movement "sculpts" lines into the riding surface. If you're on a narrow road, your nicks will be small and fast, like drawing an "S" on the ground. Carving can also be very wide and fluid if you have a wide moving area. To carve, you need to keep your knees bent (you need your center of gravity low), your arms out and your head up. See where you want to go and remember, your whole body is involved. If you want to go right, point your right arm. This guides your upper body while turning. Your hips come next, and then your skateboard. When engraving, keep the speed consistent. Carving is a great and fun exercise to keep improving your balance and feel for the board.
2. How to Brake
Proper braking is important on electric skateboards. Thankfully, it's fairly simple, as you can control the braking system with a remote. First, you'll want to lean back slightly, because your weight automatically shifts forward when you brake. Leaning back compensates for this movement. Bend your knees slightly, making sure your front foot is stable and slightly stiff. Use the remote to gradually reduce speed before braking.
Shift your weight onto your front/dominant foot so you're balancing on that leg only. Gently touch the ground with the back foot, slowly increase the pressure, and start to slow down. The harder you brake, the more likely you are to lose your balance, so be careful.
Most electric skateboards use regenerative brakes, which means the battery gets energy when you go downhill. The board can sense when the motor is not needed and send that energy to the battery.
Комментарии (0)